MankatoPole Barns
Large metal building with its wide bay door open

Machine Sheds ยท Mankato Pole Barns

Machine Shed Builders in Mankato, MN

Wide, open sheds with doors tall enough for the big iron. Get a free quote.

Machine Sheds across Blue Earth, Nicollet and Brown counties

Get a Free Machine Shed Quote

Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.

  • Free quotes
  • No obligation
  • Shells to finished buildings
  • Site prep included

Fill out the form below for your free quote ๐Ÿ‘‡

Rather talk? Call (507) 564-4752

Machine Sheds

Machine Shed Builders for Mankato, MN

South-central Minnesota runs some of the biggest crop operations in the state, and the machines have grown along with them. A shed that fit a tractor and planter twenty years ago may not take today's combine with the head on. We design from the largest piece of equipment you expect to own, with a margin, so the building is still useful when you trade up.

Width and height come first, then the doors. Sliding doors that span the front, or a door on each end so machines drive straight through. The floor can be packed gravel or concrete, depending on whether you grease and repair inside. On open ground near New Ulm, Sleepy Eye and Fairmont the wind is strong, so bracing, girts and door hardware are engineered with that in mind.

Dark metal-sided building with a gable roof on open pasture

What's included

What goes into machine sheds

  • 01

    Door planning

    Door width and height set from your tallest and widest machine, in sliding or bifold styles.

  • 02

    Open interior

    Long-span trusses with no interior posts, so you can maneuver and park in rows.

  • 03

    Wind bracing

    Bracing and heavy girts built for flat, windy ground.

  • 04

    Floor options

    Gravel for storage, or concrete if you service equipment indoors, with a drain if you want one.

  • 05

    Attached lean-to

    A side shed for implements, parts or hay, sized for snow drifting off the taller roof.

  • 06

    Yard approach

    A gravel apron and drainage so spring mud does not keep you from the door.

Building ideas

Machine Sheds: what they can look like

  • Weathered barn with a metal roof and an old orange tractor on the lawn
  • Red farm barn beside a steel grain bin under a big sky
  • Inside a long steel farm building with skylights, a center alley and hay
  • Very large hangar-style steel building with tall doors
  • Gray steel machine shed with its big door open, grain elevator across the field
  • Inside an empty clear-span machine shed with wood posts and white steel liner

Example photos of the building type.

How it works

How a machine shed job works

  1. 1

    List the iron

    Every machine, its dimensions and how you move it in and out.

  2. 2

    Choose the spot

    Placement against the wind, near the yard, with room to turn long units.

  3. 3

    Plans and permit

    Engineering for the span and the loads, and the township or county steps.

  4. 4

    Raise it

    Posts, trusses, steel and doors, then the floor and gravel approach.

Questions

Machine Sheds FAQs

How tall should the door on a machine shed be?

Taller than the highest thing you will drive in, with the implement folded or raised, plus clearance. A combine with a roof beacon or a planter with markers up can surprise people. Measure the worst case and add room.

Do I need a permit for a shed on my farm?

A shed on a working farm may be exempt from the State Building Code, but setbacks, driveway access and county land-use permits can still apply. Rules differ by township and county, and we check which ones apply to your parcel.

How much does a machine shed cost?

The span, the length, the sidewall height and the door size move the total. A concrete floor costs more than gravel, and a wide clear span needs heavier trusses. Dirt work depends on the ground, since level well-drained land is simplest.

How do you keep a big shed from blowing apart in the wind?

Engineered bracing and girts, deep posts or a solid anchor, and door hardware built for gusts. The big door openings are the weak spot, so the framing around them is beefed up and the walls are built to carry the load.

Can I store grain or hay in a machine shed?

Machine sheds are made for equipment, but a lean-to or a divided bay can hold hay, and a building can be designed for bulk storage with the right wall strength. Tell us what you plan to store and we design for it.

Where we build

Machine Sheds in these towns

We build machine sheds sized for combines, planters and grain carts in every town below.

Ready to price your machine shed?

Free quotes. Call or fill out the form.